Acoustic Fluid Logger and Pressure Pulse Gas Gun
19
PRINT is used to print the echo in memory in one of the seven display modes.
PRINT –
Prints the echo in the special square root of the amplitude manner.
1 PRINT – Prints the echo in the 1(minimum) amplified mode.
2 PRINT – Prints the echo in the 2 amplified mode.
3 PRINT – Prints the echo in the 3 amplified mode.
4 PRINT – Prints the echo in the 4 amplified mode.
5 PRINT – Prints the echo in the 5 amplified mode.
6 PRINT – Prints the echo in the 6 (maximum) amplified mode.
STOP
Stop is used to stop the current echo from printing.
MAN
- (Manual mode)
MAN (Manual mode) is used to turn off the shot recognition and start recording
immediately.
When in the
MAN
mode, the Acoustic Fluid Logger starts recording immediately when the
MAN
button is pushed. The tape will be printed in one of the standard seven display plots.
MAN – Starts the plot in the special square root of the amplitude mode.
1 MAN – Starts the tape in the 1 (minimum) amplified mode.
2 MAN – Starts the tape in the 2 amplified mode.
3 MAN – Starts the tape in the 3 amplified mode.
4 MAN – Starts the tape in the 4 amplified mode.
5 MAN – Starts the tape in the 5 amplified mode.
6 MAN – Starts the tape in the 6 (maximum) amplified mode.
Note: Once you push
MAN
the unit immediately starts recording data. So, if you have a manual
fire gun, you will have to calibrate the tape from the location of the shot blast on the tape, not from the
start of the tape, as usual.
Содержание Acoustic Fluid Logger III
