Sage 923lts, Руководство пользователя

Страница: 9 / 28

Calibrating
Please wait . . .
Battery:
z z z z z z z z z
Section 2
Getting Started
Unpacking
In addition to this User’s Guide, the following items should arrive with your 923LTS
system:
•
923LTS hand-held unit
•
AC adapter/power cord
•
Connector cable (RJ-48 plug on one end, RJ-11 plug on the other end)
•
Banana plug to alligator clip ground cable
Options
Additional items may be included with your shipment:
•
RJ-48 to alligator clips cable/adapter
•
RS-232 cable
•
padded case with belt loop
•
Sage Instruments 923LTS Automated Local Loop Testing System Quick
Reference Guide (a laminated card)
Charging the Batteries
WARNING : Use only the AC/DC transformer supplied with the 923LTS to charge the
batteries. Other transformers may damage the
923LTS, and void the warranty.
Initial Charge
The 923LTS comes with rechargeable batteries
installed at the factory. Before using the
923LTS for the first time, charge the batteries for two hours.
Do not turn on the 923LTS while the batteries charge for the first time.
3. Make sure the 923LTS is off (i.e., the display is blank and dark).
4. Plug the AC adapter power cord into a 110V AC outlet.
5. Plug in the cord from the AC adapter into the power port on the bottom of the
923LTS. Leave the power cord plugged in for at least two hours to allow the
batteries to fully charge.
Recharging
Each time the 923LTS is turned on, the system checks the batteries.
To fully recharge the battery:
1. Turn off the 923LTS.