Sage 923lts, Руководство пользователя

Страница: 26 / 28

26 9100-0923-01 V2.0 SAGE INSTRUMENTS
Does the 923LTS need to be calibrated?
Only in very rare situations does the 923LTS require calibration. The 923LTS uses test
parameters supplied by the Sage 950RTS responder (or from the Sage 356Eplus
responder). To download updated tests, see Loading Tests in Getting Started.
How can I restore the original defaults?
You may want to remove all the custom data you have entered into the 923LTS, and
restore it to its original, “new” state. This is accomplished by performing a cold boot.
Cold Boot
A cold boot erases all stored test results, test suite names, and responder phone lists. It
returns the 923LTS to its original, “new” state. To perform a cold boot, follow these steps:
1. Turn off the 923LTS.
2. Press and hold the CLR key.
3. While holding down the CLR key, press and hold the ON/OFF key.
Continue holding both the CLR and the ON/OFF keys until two lines of bars
appear in the display.
4. When the bars appear, release the ON/OFF key.
Continue to hold down the CLR key until the display goes blank.
5. When the display goes blank, release the CLR key.
The cold boot is now complete, and settings are returned to their factory default
settings.
Confirming a Successful Cold Boot
After you perform a cold boot, you can confirm that the 923LTS is in its original, “new”
state. Follow these steps to confirm a cold boot:
1. Press the ON/OFF key to turn on the 923LTS.
2. Press NEXT to display the Main Menu.
The Main Menu should contain only two options: 1: <Test> 2: Setup.
3. Press 1 (or NEXT).
4. The Test Select screen should appear with only one selection: 1: <Update
Tests>.
What are the 923LTS’ default settings?
There are three categories of default settings on the 923LTS:
•
Interfaces (to connect the 923LTS to phone lines and to a computer or printer)
•
Environment (to adjust the display light or volume of audible alerts)
•
Phone Lists (to enter responder telephone numbers)