Sage 923lts, Руководство пользователя

Страница: 19 / 28

SAGE INSTRUMENTS 9100-0923-01 V2.0 19
How to Perform a 100 or 102 Test
If the 923LTS is equipped with 100 or 102 responder tests, follow the steps below to
perform them.
1. Turn on the 923LTS.
2. Press NEXT to display the Main Menu.
3. Press 1 to view the Test Select screen.
4. Use the
p
or
q
keys to scroll through the Test Select screens until the desired
test displays, then use the numeric keypad to select the test number.
NOTE: If installed, the 100 and 102 responder menu options are found
immediately following the Update Tests option.
5. Connect the 923LTS to the line being tested.
Insert the larger RJ48 connector into the port on the 923LTS. Insert the smaller
RJ11 connector into the jack for the line to
test.
6. Press NEXT to display the Responder
screens. Use the
p
or
q
keys to locate the
desired responder (i.e., the responder that
calls either the 100 test line or the 102 test
line).
7. Press NEXT to start the test.
8. When testing is complete, the 923LTS immediately displays complete detailed
results.
NOTE: The 923LTS stores only the results of the most recent 100 or 102 tests.
Aborting a Test
While a test is in progress, you can end it and return to the Main Menu. To abort a test
while in progress, follow these steps:
1. Press the CLR (clear) key. A warning screen
displays, and the test continues.
2. At the warning screen, press F1.to stop the
test and return to the Main Menu.
3. To continue the test, press F2.
Viewing Test Results
Results for up to ten tests are stored on the 923LTS. Immediately following, or at any time
after completion of a test, you can view results using the 923LTS display.
You can view the following test information:
•
General test information
•
Test ID
•
Test call
•
Call back
Test in Progress!
Do You Want to Abort
Yes No
F1 F2
Results:
Cmsg: 8 dBrnC
3K FLAT: 13 dBrn
ERL: 9 dB
100 Test Line Results