This document and all copies are the property of Spider
®
. All dimensions and data are indicative only.
The user must ensure that the equipment complies with local rules and regulations.
Document No: 721641-1
Revision: B
Issue Date: 2017-Dec-18
Page 15 of 38
4. THE SPIDER
®
UPPRO P2514 OR P2314 HOIST
The Spider
®
UpPro P2514 or P2314 Hoist is used to raise, support, and lower suspended scaffolds,
building maintenance units, and work cages on, or in, buildings and structures. If the hoist is used
for any other purpose, you must take all necessary precautions to ensure that both the design and
operation of the setup in which the hoist will be used will be hazard free, and that such use conforms
to the specifications of the equipment manufacturers.
a) f
eatUreS
of
the
S
Pider
®
U
P
P
ro
P2514
or
P2314 h
oiSt
Feature
Function
Benefit
Operating range
460V 60 Hz unit,
+10%/-15%, range
of 414V - 506V
• Proven reliable performance
from 414V to 506V run volts
• Tested in 75 min. continuous
run tests
• Reduces service calls
• Extends electric component life
• Eliminates power-induced down
time
• Allows longer Power Cord drops.
Spring and Dual
Roller Traction
• Applies constant force to the
wire rope
• Allows 5500 Lbs /2500 kg capacity.
Controlled Descent
• Levers operate brake manually
for controlled descent during
power failure
• Allows self-rescue of workers and
platforms
Remote Operation
• Pendant control two-stage with
emergency stop button
• Pendant Control two-stage with
emergency stop & run button
• Allows greater visibility of surroundings
during operation
• Full power cutoff emergency stop
Low Voltage
Indicator
• Indicates whether the hoist is
receiving adequate power
• Alerts workers to poor site conditions.
• With VFD, hoist will still function at
reduced voltage
Hour Meter
• Indicates hours of hoist
operation
• Helps determine hoist service intervals
Variable Speeds
(GHS Model)
• 5000 lb load: 15, 30, 40, 60
ft/min (2300 kg load: 5, 9, 12,
and 18 m/min)
• 5500 lb load: 15, 30, 40 ft/min
(2500 kg load: 5, 9, and 12 m/
min)
• Facilitates load positioning
• Allows faster movement of platform
increasing site productivity
• Speed Adjustability can allow
optimization, matching to the needs of
the jobsite
