C. Basic Use
25
Tighten Harness Straps
Pull on harness adjustment
strap to tighten harness
straps snugly.
NOTE:
A snug harness is not
loose and lies flat against
the infant without sagging.
It does not press on the
infant’s flesh or push the infant’s body into an unnatural
position.
Position Chest Clip
Slide chest clip up or down
so that it is at mid-chest
(even with armpits) and
away from the infant’s
neck.
6.
Failure to fasten and tighten the harness
system correctly may allow the infant to be
ejected from the infant restraint system in a
crash or sudden stop causing serious injury
or death.
Do not mistake comfort for safety. Harness
system must be snugly adjusted.
Check Harness
Tightness
Try to pinch the harness
straps at the shoulders. If
you can pinch the harness
strap, tighten more. If your
fingers slip off, the harness
is tight enough.
5.
4.
26
C-8
Removing Infant From Infant Restraint
Loosen Harness
Straps
Push in on the harness
adjustment lever under
the flap. Pull out on
harness straps just
above buckle tongues.
1.
Release Chest Clip
Press on release button
and pull apart.
2.
Unbuckle Harness
Straps
Press down on the red
buckle release button
to release the buckle
tongues. Pull buckle
tongues out.
Place harness straps over
sides of infant restraint
and remove the infant.
3.
4358-6693 Light N Comfy Elite, OnBoard 22 ENG.indd 27-28
4358-6693 Light N Comfy Elite, OnBoard 22 ENG.indd 27-28
11/5/14 10:47 AM
11/5/14 10:47 AM