SAFEGREASE, SAFEOIL, MULTILUBE
ST-1440
14402BEN.doc
12.11.2004 Rev. 2B
14 (19)
Display function keys
Key Description
Chnl
Channel
selection
Press key to display the settings for the next channel.
Channel can also be selected with
Í
and
Î
keys, which can used for toggling
between channel up and down.
Othr
Other
displays
Press the key to open a display in which you can choose lubrication counter
display or configuration display.
Set
Settings
mode
Press key to go into settings mode in which you can change the settings for the
selected channel. The program requires a password before it accepts this
command.
Esc
Back to basic display
4.3 Settings mode
The settings for the selected channel can be displayed by selecting
Page
-
Set
at basic display.
The program requires a password before it accepts this command.
Set Password
0000
---- OK <--- Esc
Figure 9.
Entering password
Use keypad to enter a four-digit password (
1440
). Press
OK
to accept the entered password,
and the system goes into settings mode. A digit can be deleted using the
<---
key. If the
entered password is not correct, you will be prompted to enter the correct password.
CH12 SG2 Machine 1
Tc=024h00min P=0230s
Hp=120bar Lp=050bar
---- OK ---- Esc
Figure 10.
Settings mode
The flashing cursor indicates the field to be set. Use keypad to enter the value. Press
OK
to
save the entered value, and the cursor moves on to the next field to be set.
