Safeline STANDARD SERIES, Инструкция по эксплуатации

Страница: 13 / 81

Page 1
SPECIFICATION - STANDARD SERIES DETECTORS
BASIC TECHNOLOGY
High frequency low power electromagnetic coil
system.
Frequency of Operation
Crystal controlled in the range 10 kHz to 500kHz
staggered frequency versions available.
Input Power
Voltage 85 to 265 V AC, Current 1.5 amps max.
Frequency 47 to 440 Hz.
For cases where conformance to various safety
specifications (UL, CSA, etc.) are required, input
voltage range will be 85 to 250 V AC.
For connection to TN (EN60950:1992) power
distribution systems only. For connections to other
power distribution systems please contact your
supplier.
Temperature Range
Operating -10
°
C to +45
°
C (14
°
F to 110
°
F)
Storage -10
°
C to +50
°
C (14
°
F to 120
°
F)
Humidity Range
Maximum relative humidity 93% for temperatures
up to 45
°
C.
Warm Up Time
Zero seconds at an ambient temperature of 20
°
C
Balancing
Automatic - fast switch on (5 seconds typical)
Internal Battery Backup
Cell life - 5 years
Discharge time - 6 months from power off at temp.
of 20
O
C
Product speed
Selectable high and low from the control panel,
low - x 1, high - x 3
Low - 0.05 to 2.5 metres / min. / mm. of aperture
height
(4 to 200 feet / min. / inch of aperture height)
High - 0.05 to 7.5 metres / min. / mm of aperture
height
(12 to 600 feet / min. / inch of aperture height)
Higher and lower speeds available on request
Relay Output
Two sets of volt free change over contacts
Rating 5 amps at 250 V AC/30 V DC non- inductive
Alarm Timers
See timer section in manual.
Counters
If the maximum counter value is reached, the next
increment will change the digits to *.
Both counters are independently resetable from the
control panel.
Reject Counter.
Counts reject relay operations, not the number of
detections or the number of rejects.
Maximum counter value - 9999
Pack Counter
Requires an on line Pack Sensor if a gated timer is
not used.
Maximum counter value - 16777214
Maximum count rate - 3000 packs/minute at a pack
space ratio of 1:1.