12
MX3+ v.2.02 EN
Configuration
Configuration
examples
SafeLine emergency
telephones
Example 1:
Storing of two dif-
ferent telephone numbers, one
to be answered by P100 code
and the other one with voice.
For test facility, see example 2.
1.Start configuration:
2.1
st
phone number:
3.2
nd
phone number:
4.Call type 1
st
number:
5.Call type 2
st
number:
6.Alarm button delay:
7.End configuration:
- Example: Answered with P100 code.
- Example: Answered as voice call.
- Example: 3 seconds delay.
1.Start configuration:
5.LMS phone number:
4.
Set number of days
between test alarm:
3.Set test alarm type:
Example 2:
SLCC (SafeLine
Call Centre) and 3-day test.
If at any time you need to start over, use the factory reset
command *99*1#. Please refer to the full configuration setup in the
“Parameter list” as these are merely examples.
(Only if using SLCC)
(For more information, please refer to parameter *17* in the
”Parameter list”)
Lift ID code (each lift must have its own unique code).
- Example: 3 days between test alarm.
- Example: Test alarm type P100.
7.End configuration:
6.Test alarm:
2.Enter P100 ID code:
