Safeline MX3+, Руководство пользователя

Страница: 7 / 24

7
hologram
serial nr.
sw ver.
www.safeline-group.com
1 2 3
4 5 6
7 8 9
* 0 #
SafeLine MX3 +
MX3+ v.2.02 EN
Overview
Wiring diagram,
output 1, 2 and
external button
Use CABLE13 to connect SafeLine MX3+ with
external accessories. Output 1 and 2 can be
configured independently.
Requires that the output
is configured for the
corresponding function.
Please refer to the Parameter
list (*88*) or the app for
more information.
0 = Pictogram (Output 1 - yellow, Output 2 -
green)
1 = Activate with DTMF 8/9 (Output 1 - DTMF8,
Output 2 – DTMF9)
2 = System failure
3 = Emergency bell
E.g. *88*13# configures output 1 for an
emergency bell.
Pictogram yellow
(Output 1, Configuration code 0)
The output is activated at the following events:
- Input for emergency bell is activated.
- Input for emergency bell is set active at a certain time.
The output is deactivated at the following events:
- Distress input deactivated before set time.
- Active alarm ended.
- Reset button (#) is pressed.
Pictogram green
(Output 2, Configuration code 0)
The output is activated at the following events:
- Voice communication activated.
- Incoming call connected.
The output is deactivated at the following events:
- Outgoing call ended/timeout/cancelled.
- Incoming call ended/timeout/cancelled.
- Reset button (#) is pressed.
Outputs
The two outputs can be configured independently
with a number of functions. The configuration
is performed via SafeLine Pro or with the
configuration code *88*XY#, where X specifies
output 1 or 2 and Y specifies the function:
Output 2
Output 1