SAFE HOME WS500S, Руководство пользователя

Страница: 21 / 112

www.safehome.dk
21
4.3 House Security Code and Zone Code Settings
You can change the house security code on each sensor, smart panel and other modules
of your security system to avoid interference with other systems.
In most cases you will NOT need to change the factory settings of the house security
code. If the Smart Panel and sensors activate intermittently or do not work at all, you
may be able to solve the problem by changing the house security codes on all system
modules.
Step 1:
There are 4 jumpers/dip-switches on each device. Remove the battery compartment
cover, then pull out the Jumper to change the house security code setting and make sure
the jumpers on the Smart Panel, sensors and remotes match exactly.
Jumpers for
house security
code • Smart Panel
Default house code:
1: ON, 2: ON, 3: ON, 4:ON
Dip-Switches for
house security
code • Key Fob Code
Default house code:
1: ON, 2: ON, 3: ON, 4: ON
Step 2:
Zone settings of switches/sensors
Jumpers for
zone code There is 1 jumper in each sensor. Determine
the location of the sensor in your home, then
remove the jumper compartment cover. Pull
out the jumper and reassign it to the target
zone (zone 1 to 8), replace and screw the
cover to complete the zone code setting.