SAFE HOME WS500S, Руководство пользователя

Страница: 20 / 112

www.safehome.dk 20
4.2.5 Checking remote ID
Step Keys Description Note
1
PIN +
You must be in
STANDBY mode
before
programming To make sure you are in STANDBY
mode:
Enter your PIN
Press
, the symbol disap-
pears from the screen.
2
+
Press the keys on
control panel to
access the control
by ID status. Then
press any button on
the remote control
to control the
remote ID When the control panel is in this
status, the screen will flash with the
total number of remote controls that
are connected.
For example, the screen flashes
“03” if there are 3 connected
remotes. ID of a specific remote
control is displayed on the
press any button on remote control.
Doing so will control panel screen
displays the remote ID.
(One beep indicates that the proce-
dure is performed correctly.)
3 Complete the set-
ting After the setting is completed, return
the Smart Panel to STANDBY for
mode selection.