www.safehome.dk
6
2. Installing the Wireless Security WS500S
2.1 Installing the Control Panel
Choose location of the control panel:
Note
• The panel must have 220V power, so it should be located near a power outlet.
• The panel must be easily accessible for battery replacement and operation.
• The panel should not be placed near doors or windows where intruders have easy
access to it.
• The panel should not be placed close to the very hot devices (ovens, stoves, etc.) or
near devices that may interfere with the wireless signal.
• The panel must not be exposed to water.
When the location of the Smart Panel is selected, you are ready to connect the system.
2.2 Powering up the Control Panel
Unscrew the battery compartment and remove the cover. Take out the LED demo socket,
and insert a new battery noting the polarity as shown in the diagram below. Plug in the
AC adaptor to the Smart Panel and connect it to a wall socket. Replace the cover and the
screw.
Step
Description
Note
1
Insert 9V Alkaline
backup battery
You will hear one beep and the backlight will blink
within 1 second (Yellow>Red>Green>Yellow)
The Smart Panel will display the below image:
The Smart Panel will enter “STANDBY” mode after the
automatic self-checking is complete. Then
will
appear on the LCD screen.
Содержание WS500S
