Saeco Cappuccino, Руководство по обслуживанию

Страница: 26 / 143

3. OPERATION ROYAL
8/25 REV.4 SEPT.2003 Saeco International Group
Action Comments Display
17 Hot water
Quantity programme
The last programme saved is
activated by pressing the hot
water button briefly.
Hot water
Cappuccino maker
18 Cappuccino
(only when
cappuccino
maker programme
is
deactivated in the user menu)
Press the cappuccino button
briefly to start cappuccino
dispensing; press again to stop.
Cappuccino
19 Cappuccino
Quantity programme
(only when
cappuccino
maker programme
is
activated in the user menu)
Keep the cappuccino button
pressed for the desired time.
The last programme entered is
saved
Cappuccino
Quantity
programme
20 Cappuccino
Quantity programme
The last programme saved is
activated by pressing the
Cappuccino button briefly.
Cappuccino
Note:
The Steam and Cappuccino functions can be used parallel to the coffee programme in the Royal
Professional Instant Steam, Royal Cappuccino and Royal Cappuccino Redesign systems.
Cleaning
Empty dregs drawer Storage capacity of 30 tablespoons (dreg counter reset only if warning
to empty grounds container is triggered and machine is turned on)
Empty drip tray After 30 servings
Clean water tank. As required
Clean coffee bean container. As required
Clean the housing. As required
Rinse brewing unit 1 x per week
Clean brewing unit and
lubricate
Clean filter
1 x per month
Descale Depending on water hardness.
Descale:
1. Place Saeco descaler into fresh water tank.
2. Fill with about one litre of hot water.
3. Remove about two to three cups via the brewing unit (cannot be poured).
4. Activate the Descale item in the user menu by selecting OK and open the HWS valve
(place a sufficiently large container under the steam pipe). The descaler mixture is pumped
at intervals through the circuit.
5. Rinse: Fill the water tank once again and open the steam valve (about 2-3 cups via
brewing unit).
Reset:
Under the descale indicator item (Enter - YES - Enter).