Sabiana ENERGY SHP-270, Инструкции по установке, использованию и обслуживанию

Страница: 116 / 124

116
English
RESETTING THE SERVICE LIFE OF FILTERS
IN UNITS WITH T-EP
REMOTE CONTROL
The filters must only be replaced when indicated
on the control display (icon ).
Whenever the unit filters are replaced,
the filter replacement countdown
must be reset:
•
Access the User Settings Menu, press “M”.
• Use the
TOUCH PAD
to select
the
filter alert icon .
• Press the key to confirm.
• The filter replacement timer has been reset.
In case the filters need to be changed before the
timer deadline, it is in any case possible to reset
the countdown at any moment by following
the just described procedure.
INSTALLER MAINTENANCE
The following maintenance interventions must
only be carried out by the installer or by qualified
personnel:
• Inspect the filters and clean them if necessary;
• Inspect the heat exchanger and clean it if nec-
essary;
• Inspect the fans and clean them if necessary;
• Check the condensate drain once every two
years.
The following paragraphs have a short descrip-
tion of the maintenance interventions.
PLEASE NOTE: If maintenance is not carried out
regularly, the ventilation system might not work
properly.
• Check the heat exchanger
Always disconnect the power
before accessing the unit.
Check the heat exchanger once every two years.
Figure 1 -------------------------------------------------------
• Take the cover off the electrical compartment “
A
”
by undoing the screws “
1
” (x2);
• Use a TORX screwdriver to remove the screws “ 2 ”
(x9) and take off the inspection panel “
B
”;
ATTENTION!: once screws ”2” have been removed,
hold panel “B” so that it does not fall.
Fig. 1
Figure 2 -------------------------------------------------------
Fig. 2
• Remove the insulation mats “ D ” and “ E ”.
A
1
2
B
2
D
D
E