NVR User Manual
80
Step4
Click
Save
button to take effect.
-------End
OSD
You can configure the OSD (On screen Display) information of the NVR.
Step1
Choose ”
(Parameter Configuration) > Service Configuration > OSD”,The
OSD
page is
displayed.
Step2
You can configure the follow parameters.
Step3
You can configure the privacy zone settings for the camera. Check the
Enable Privacy
checkbox and it pop up a window. If the IPC device type is MJ or IPC protocol type is ONVIF,
Parameter
Description
Channel
You can select one channel from drop-down box list..
Channel name
You can modify the IP Camera’s name.
After you modify the name and save the modification, the NVR
system synchronizes the channel name to the corresponding IPC
device name.
The channel name will be shown on the top left of the video
image.
Display Channel
Name
There are two options: Yes or No. Select Yes and you can see the
IP camera’s name on the video
Display Time
There are two options: Yes or NO. Select Yes and you can see the
system date on the channel video.