NVR User Manual
97
Disk Management
Set the video coverage strategy, format disk
Motion Detection
Alarm area and schedule settings
User Accounts
User account management
Operating System
Microsoft Windows XP, 7, 8, 8.1, Mac OS
Browser
Microsoft IE8 and above version ,Firefox,Safari
Physical and
Environmental
Power Supply
DC 12V/3.0A
Dimension(LxWxH)
220 × 209 × 40mm (L x W x H)
Net Weight (g)
750g
Operating Temperature
-20°C ~ 55°C (-4°F ~ 131°F)
Operating Humidity
20% ~ 85% non-condensing
Storage Temperature
-20°C ~ 60°C (-4°F ~ 140°F)
Storage Humidity
0% ~ 90% non-condensing
5.4
FAQ
1. No image displayed on the monitor after starting up normally.
Verify the device is connected with the monitor via HDMI or VGA cable.
Verify the connection cable is good.
Verify Input mode of the monitor is correct.
Please check the input mode of the monitor matches with the output mode of the device (e.g. if the
output mode of NVR is HDMI output, then the input mode of monitor must be the HDMI input). And
if not, please modify the input mode of monitor.
2. No record file found in the NVR local HDD, and prompt “No record file found”.
Verify the system time setting is correct.
Choose “Menu > Settings > General” in the GUI interface, and verify the time is correct.
Verify the search condition is correct.
Choose “Menu > Playback” in the GUI interface, and verify the channel and time are correct.
Verify the HDD status is normal.
Choose “Menu > About > HDD Info” in the GUI interface, view the HDD status.
3. Why recording is not performed after motion detection is enabled?
