NVR User Manual
77
Set the record schedule, and then the NVR automatically starts/stops recording according
to the configured schedule. The recording files will be save to the HDD or mobile store
device.
The Icon
indicate starts schedule recording at the right bottom of the screen for
certain channel.
Step1
Choose ”
(Parameter Configuration) > Service Configuration > Schedule”. The
Schedule
page is displayed.
Step2
Select channel from drop-down box list.
Step3
Select Open or Off for the
Enable
schedule record.
Step4
Set Recording schedule time of the channel.
You can choose a week, one day of a week, the certain time period for the recording.
For detailed procedure, please refer to Motion Detection.
Step5
Click
Save
button to take effect.
-------End
External Alarm
External alarm input devices (such as door status sensor, infrared sensor, and smoke
sensor) are connected through the alarm input interface and external alarm output devices
(such has local audible alarm and visual alarm) are connected through the alarm output
interface. After the devices are connected successfully, you can configure information
about the external alarm devices. When an external alarm input device triggers an alarm,
the NVR system transmits the alarm information to an external alarm output device, which
makes corresponding response.
