NVR User Manual
66
Step3
Click
Save
button to take effect.
Step4
Click Test to see if Mail has been successfully configured.
If the test success, you can see the success information, at the same time the receivers will receive a
test mail.
-------End
FTP Settings
The system can be configured to send an picture to the FTP server if an alarm or motion
event is detected etc..
Step1
Choose ”
(Parameter Configuration) > Local settings > FTP Settings”. The
FTP Settings
page is displayed.
Parameter
Description
Enable E-Mail
Enable or Disable the Email function.
Authentication
Enable or Disable the server authentication feature.
SMTP Server
The SMTP Server IP address or host name.
SMTP Port
The SMTP port is usually set as 25. Some SMTP servers have
their own port, such as 587 or 465.
Transport Layer
Security
Transport Layer Security usually is None.
If you use Gmail, Transport Layer Security must be set to TLS
or STARTTLS and SMTP Port must be set to 465 or 25 or 587,
which port you choose should be decided by which Transport
Layer Security you select.
SMTP Username
The user account of sender ’s Email for SMTP server
authentication.
SMTP Password
The password of sender ’s Email for SMTP server
authentication.
Sender
The Email address of sender.
First/Second
/Third/Fourth
Receiver
The Email address of user to be notified. you can set 4
receivers
