SA-PAM-SAN-Eth
User Manual
S-Access GmbH
Tel: +41 44 700 31 11
Oberhausenstrasse 47
Page
21
of
32
Fax: +41 44 700 31 03
8907 Wettswil a/A
Email:
Switzerland WEB:
www.s-access.ch
6.4.1.3 Min- Max Connection Speed (only if Auto selected and FW 2.41 for 4W)
•
In the Min. Max Connection Speed menu, you can specify your desired Adaptive mode
speed limit borders in the range of 72 kbps to 2312 kbps for 2wire units and 528 kbps to
4624 kbps for 4wire models.
6.4.1.4 Fixed Connection Speed (only if Fixed is selected)
•
In the Fixed Connection Speed menu, you can specify your desired speed in the range of 72
kbps to 2312 kbps for 2wire units and 528 kbps to 4624 kbps for 4wire models
6.4.1.5 Annex
•
With the Appendix menu you can choose between A, B, A / B. If you don’t know what Annex
you have to setup, then use the A / B configuration.
6.4.1.6 Tx Level Adjustment
•
In the Tx Level Adjustments menu you can setup you desired TX output level in the range
from +2dB to –13dB.
Please note: changing the default value of 0 to another value may cause serious
malfunction of the DSL line. It should be changed only by qualified personal.
6.4.1.7 2W / 2CH / 4W
•
In the 2W / 4W (2wire / 4 wire) Adjustments menu you can setup you desired number and
mode of the DSL line. The following modes are possible:
2W:
1 DSL line, normal mode
4W:
2 DSL lines, dual pair mode (4W models only)
2CH: 2 DSL lines, multipoint mode (4W models only)
1+1: 2 DSL crossover lines, safety mode (4W models only)
