SA-PAM-SAN-Eth
User Manual
S-Access GmbH
Tel: +41 44 700 31 11
Oberhausenstrasse 47
Page
20
of
32
Fax: +41 44 700 31 03
8907 Wettswil a/A
Email:
Switzerland WEB:
www.s-access.ch
6.4.1 DSL
Setup
In this menu you can setup the DSL link. When you have selected that menu, the following will
appear:
Configuration Management->DSL Setup
1.[Loop 1 Operation Mode]:Slave
2.[Loop 1 Auto/Fixed]:Fixed
5.[Loop 1 Fixed Connection Speed]:2312K(36N)
6.[Loop 1 Annex]:A/B
7.[Loop 1 Tx Level Adjustment]:0 dB
19.[2W/4W]:2W
Select item number or ESC to Upper level menu>>
6.4.1.1 Operation Mode
In this menu you can setup the unit to one of the following states:
Master, Slave
6.4.1.2 Auto / Fixed
This Menu is NOT available if the unit is in 4W mode! Except the unit has firmware version
2.41! (Ask
if you like to get this special version)
In this Menu you can setup the unit to one of the following states:
Auto, Fixed
If Auto is selected, the unit works in the adaptive mode.
If Fixed is selected, the unit works with fixed line rates.
