RYTEC DG1215, Инструкция по установке и эксплуатации

Страница: 21 / 26

15
SETTING THE PROGRAM OPTIONS
As described in OPTIONAL PROGRAMS on page 13,
there are 6 program menus and their submenus
available. You will use the UP and DOWN arrows, the
Set button (A/A Close Delay) and the Select button
(Auto Close Delay) to select and set the program
options which will be shown on the display. (See
Figure 18.)
A0500029
Set Button
Select Button
DOWN
Arrow
UP Arrow
Display
Figure 18
1. To enter the programming mode, press and hold
both the OPEN and CLOSE Backup Timer buttons
for three seconds. The display will change to three
0's as shown in Figure 19. To continue the pro-
gramming mode, you will have to enter the three-
digit security code. Contact the Rytec Customer
Support Department at (414) 677-9046 for the
code
000
A0500029
Figure 19
2. The first (left) digit will blink. Press the UP or
DOWN arrow key to raise or lower the value of the
first digit. After the first digit is set, press the
Select button to move to the next digit. Repeat the
process for all three digits of the security code,
then press the Set button to enter the Program
Mode.
3. Once you have entered the program mode, the
display will show the various program menus.
Press the Select button to scroll through the
programs. (See Figure 20.)
PrOG - 1
Select
Button
A0500029
Figure 20
SETTING THE PROGRAM OPTIONS