background image

17 — English

WARRANTY

YOUR WARRANTY RIGHTS AND OBLIGATIONS
The U.S. Environmental Protection Agency (EPA), the California Air 
Resources Board (CARB), and Techtronic Industries North America, 
Inc., are pleased to explain the Emissions Control System Warranty 
on your new 2013/2014 small off-road engine. In California, new 
equipment that uses small off-road engines must be designed, built, 
and equipped to meet the state’s stringent anti-smog standards. In 
other states, new small off-road engines must be designed, built, and 
equipped at the time of sale to meet the U.S. EPA regulations for small 
off-road engines. The small off-road engine must be free from defects 
in materials and workmanship which cause it to fail to conform with 
U.S. EPA standards for the first three years of engine use from the date 
of sale to the ultimate purchaser. Techtronic Industries North America, 
Inc., must warrant the emission control system on your small off-road 
engine for the period of time listed above provided there has been no 
abuse, neglect, or improper maintenance of your small off-road engine.
Your emission control system may include parts such as the carbure-
tor or fuel injection system, the ignition system, catalytic converters, 
fuel tanks, valves, filters, clamps, connectors, and other associated 
components. Also included may be hoses, belts and connectors, and 
other emission-related assemblies.
Where a warrantable condition exists, Techtronic Industries North 
America, Inc., will repair your small off-road engine at no cost to you, 
including diagnosis, parts, and labor.
MANUFACTURER’S WARRANTY COVERAGE
This 1995 and later small off-road emissions control system is war-
ranted for three years. If any  emission-related part on your engine is 
defective, the part will be repaired or replaced by Techtronic Industries 
North America, Inc.
OWNER’S WARRANTY RESPONSIBILITIES
(a) As the small off-road engine owner, you are responsible for the 
performance of the required maintenance listed in your operator’s 
manual. Techtronic Industries North America, Inc., recommends 
that you retain all receipts covering maintenance on your small 
off-road engine, but Techtronic Industries North America, Inc., 
cannot deny warranty solely for the lack of receipts or for your 
failure to ensure the performance of all scheduled maintenance. 
(b) As the small off-road engine owner, you should be aware, however, 
that Techtronic Industries North America, Inc., may deny you warranty 
coverage if your small off-road engine or a part has failed due to abuse, 
neglect, improper maintenance, or unapproved modifications.
(c) You are responsible for presenting your small off-road engine to an 
authorized service dealer as soon as a problem exists. The warranty 
repairs should be completed in a reasonable amount of time, not to 
exceed 30 days.
If you have any questions regarding your warranty rights and respon-
sibilities, you should contact a Techtronic Industries North America, 
Inc., Customer Representative at 1-800-860-4050.
DEFECT WARRANTY COVERAGE REQUIREMENTS
(a) The warranty period begins on the date the engine or equipment 
is delivered to an ultimate purchaser. 
(b) General Emissions Warranty Coverage. Techtronic Industries North 
America, Inc., warrants to the ultimate purchaser and each subsequent 
purchaser that your small off-road engine is designed, built, and 
equipped at the time of sale to conform with all applicable regulations 
adopted by the California Air Resources Board or the United States 
Environmental Protection Agency; and that it is free from defects in 
materials and workmanship which cause the engine to fail to conform 
with applicable regulations for a period of three years from the date 
the small off-road engine is purchased by the initial purchaser. Any 

 replacement part or service that is equivalent in performance and 
durability may be used in non-warranty maintenance or repairs, and 
shall not reduce the warranty obligations of Techtronic Industries 
North America, Inc.
(c) The warranty on emissions-related parts will be interpreted as 
follows: Any warranted part that is not scheduled for replacement as 
required in the Maintenance Schedule is warranted for three years. If 
any such part (including any part that is scheduled only for regular in-
spection) fails during the period of warranty coverage, it will be repaired 
or replaced at any RYOBI

®

 Authorized Service Center at no charge. 

Any such part repaired or replaced under warranty will be warranted 
for the remaining warranty period. A statement to the effect of “repair 
or replace as necessary” would not reduce the period of warranty 
coverage. Any warranted part that is scheduled for replacement as 
required maintenance in the Maintenance Schedule is warranted for 
the period of time prior to the first scheduled replacement point for that 
part. Any such part repaired or replaced under warranty is warranted 
for the remainder of the period prior to the first scheduled replace-
ment point, and will be repaired or replaced at any RYOBI

®

 Authorized 

Service Center for no charge until that replacement point is reached. 
Techtronic Industries North America, Inc., shall remedy warranty de-
fects at any authorized RYOBI

®

 Authorized Service Center, including 

any distribution center that may be franchised to service the subject 
engines. Any diagnostic work done at a RYOBI

®

 Authorized Service 

Center shall be free of charge to the owner if such work determines that 
a warranted part is defective. Any manufacturer-approved or equiva-
lent replacement part may be used for any warranty maintenance or 
repairs on emission-related parts, and must be provided free of charge 
to the owner if the part is still under warranty. Techtronic Industries 
North America, Inc., is liable for damages to other engine components 
caused by the failure of a warranted part still under warranty.
Add-on or modified parts that are not exempted by the California Air 
Resource Board may not be used. The use of any non-exempted add-
on or modified parts will be grounds for disallowing a warranty claim. 
Techtronic Industries North America, Inc., will not be liable to warrant 
failures of warranted parts caused by the use of a non-exempted 
add-on or modified part. 
The Emission Parts List specifically defines the emission-related war-
ranted parts. Techtronic Industries North America, Inc., will provide 
any documents that describe its warranty procedures or policies 
within five days upon request by the California Air Resources Board.
EMISSIONS PARTS LIST
(1) Fuel Metering System 
 

(i)  Carburetor and internal parts (and/or pressure regulator or fuel 

injection system). 

  (ii)  Fuel Tank.
  (iii) Fuel Hose.
  (iv) Fuel Cap (EPA only)
(2) Air Induction System
  (i)  Intake manifold (only 4-stroke engines).
  (ii)  Air filter, if applicable.
(3) Ignition System
  (i)  Spark plugs.
  (ii)  Magneto or electronic ignition system.
(4) Catalyst or Thermal Reactor System
  (i)  Catalytic converter (only 2-stroke engines).
(5) Miscellaneous
  (i)  Belts (only 4-stroke engines).
Techtronic Industries North America, Inc., will furnish with each new 
engine written instructions for its maintenance and use by the owner.

TECHTRONIC INDUSTRIES NORTH AMERICA, INC., CALIFORNIA AND FEDERAL EMISSION CONTROL WARRANTY 

STATEMENT

Содержание RY28160





















































Отзывы: