Ryobi RM480e Series, Руководство пользователя

Страница: 6 / 340

disposed of properly. Never touch both terminals with metal
objects and body parts as short circuit may result. Keep
the battery pack away from children. Failure to comply with
these warnings could result in
fi re and/or serious injury.
TRANSPORTATION AND STORAGE
■ Turn off the product, engage the parking brake, and
remove the start key. Make sure that all moving parts
have come to a complete stop. Allow the product to cool
down before storing or transporting.
■ Remove all foreign materials from the product. Store
the product in a cool, dry, and well-ventilated place
that is inaccessible to children. The start key should be
removed and stored in a separate location out of the
reach of children.
■ Keep the product away from corrosive agents such as
garden chemicals and de-icing salts. Do not store the
product outdoors.
■ For transportation in vehicles, remove the start key,
and secure the product against movement or falling to
prevent injury to persons or damage to the product.
■ Use extra care when loading or unloading the product
onto a trailer or truck. Step on the brake pedal as needed
to control the speed. The product will freely roll if it is
moved on an inclined surface without stepping on the
brake pedal or engaging the parking brake. When
loading or unloading the product, do not exceed the
maximum recommended operation angle of 15°.
■ Use extreme caution when lifting or tilting the product for
maintenance, cleaning, storage, or transportation. The
blade is sharp. Keep all body parts away from the blade
while it is exposed.
TRANSPORTING LEAD-ACID BATTERIES
■ Transport the battery in accordance with local and
national provisions and regulations.
■ Follow all special requirements on packaging and
labelling when transporting batteries by a third party.
Ensure that no batteries can come in contact with other
batteries or conductive materials while in transport by
protecting exposed connectors with insulating, non-
conductive caps or tape. Do not transport batteries
that are cracked or leaking. Check with the forwarding
company for further advice.
TOWING SAFETY WARNINGS
■ Use common sense when towing equipment. Too heavy
of a load while on a slope is dangerous. Tyres can lose
traction with the ground and cause you to lose control
of the product.
■ Follow the manufacturer’s recommendations for wheel
weights or counterweights.
■ Total towed weight must not exceed the maximum
towing load indicated in the product specifications
section.
■ Attach tow equipment only at the hitch plate.
■ Never allow children or others on the towed equipment.
■ Stopping distance increases with speed and weight of
load being towed. Travel slowly, and allow extra time
and distance to stop.
■ Do not turn sharply when towing. Use additional caution
when turning or operating under adverse surface
conditions. Use care when reversing.
MAINTENANCE
■ Use only original manufacturer’s replacement parts,
accessories and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■ Service on the product and the charger must be
performed by qualified repair personnel only. Service or
maintenance performed by unqualified personnel could
result in injury to user or damage to the product. Have the
product serviced by an authorised service centre only.
■ Maintain the product with care and in good working
condition. Keep blades sharp and guards in place and
in working order. To prevent serious personal injury,
prevent damage to the product, and to maintain best
performance, replace damaged, bent, cracked, or
unevenly worn out blades. An unbalanced blade causes
vibration that could damage the motor drive unit or could
cause personal injury.
■ Turn off the product, engage the parking brake, and
remove the start key. Make sure that all moving parts
have come to a complete stop:
● before leaving the product unattended (including
disposal of grass clippings)
● before clearing blockages or unclogging the
discharge chute
● before checking, cleaning, or working on the product
● before removing the mulch cover
● before opening the grass discharge chute cover
● after striking a foreign object
– Thoroughly inspect the product for any damage.
– Replace the blade if it is damaged in any way.
– Repair any damage before restarting and
continuing to operate the product.
● whenever the product starts to vibrate abnormally
(check immediately)
– Inspect for damage, particularly the blades.
– Replace the blade if it is damaged in any way.
– Replace or repair any damaged parts.
– Check for and tighten any loose parts.
■ The side discharge chute is a spring-loaded guard that
covers the side discharge opening on the cutting deck
and deflects grass clippings and debris away from the
operator. Always ensure that the motor is off and the
blades have stopped moving before inspecting, moving,
cleaning, or performing maintenance on the side
discharge chute.
■ Replace damaged blades and bolts in sets to preserve
balance.
■ Remove the start key from the product before storing,
servicing, or changing accessories. Such preventive
safety measures reduce the risk of starting the product
accidentally.
■ You may make adjustments and repairs described in this
manual. For other repairs, have the product serviced by
an authorised service centre only.
■ Contact an authorised service centre to replace
damaged or unreadable labels.
■ Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure that the product is in safe
working condition.
6
Original Instructions