8
Configuration – System/Status
Configuration – System/Status
Configuration – System/Status
Funktionsarten
System Language
The user interface can be set to
the German or English language.
Clicking on “Save and Apply”
saves the settings specified.
Configuration – Network
You specify the operating mode
and other aspects of the configu-
ration on the “Network” tab under
“IP Settings” and “WLAN”. You can
choose between three different
operating modes:
- Access Point (factory setting),
- Access Point (WDS/Repeater)
and
- Client (WDS) (see the “Function
Types” on page 3).
Configuration – Status
Status Information
The “Status” displays the current
values of the system as well as
which devices are connected to
the AC WLAN. Information on the
channel and the stations regis-
tered in the network, for example,
is available here for configuration
purposes. If there are several base
stations registered in a network,
then the AC WLAN automatically
selects the station with the strong-
est signal. The reception quality
should not be below 20 % in order
to guarantee secure data trans-
missions.
You can also see the firmware ver-
sion here in addition to the model
of the access point.
