32
RUSH MH 4 Beam User Manual
Fuse replacement
If the fixture is completely dead, the fixture’s primary fuse F1 may have blown
and it may be necessary to install a new fuse. This fuse is located in a
fuseholder next to the Mains OUT socket on the connections panel. See
7
in
‘Fixture overview’ on page 14.
To change the fuse:
1. Disconnect the fixture from power and allow it to cool for at least 60
minutes.
2. Use a large flat-bladed screwdriver to unscrew the cap of the fuseholder.
3. Replace the fuse with one of the same type and rating only.
4. Reinstall the fuseholder cap before reapplying power.
