10
RUSH MH 4 Beam User Manual
Introduction
The RUSH MH 4 Beam™ is a compact-beam moving head fixture. It is
equipped with a discharge lamp with integral reflector in a state-of-the-art
optical system. The fixture is rugged, lightweight and compact, making it ideal
for smaller venues.
The fixture produces an intense and narrow beam for spectacular mid-air
looks and effects. It houses a fixed gobo wheel and color wheel with a
multitude of effects possible from a dimmer and strobe, 6-facet prism and
focus.
The fixture can be controlled using any DMX-compliant controller.
The fixture is supplied with a lamp (installed), a 1.5 m (5 ft.) power cable (US-
type cord cap included in US versions only) and two omega-type mounting
brackets.
Before using the product for the first time
1. Read ’Safety information’ on page 4 before installing, powering, operating
or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Never attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to an AC mains power source,
install a local power plug (not supplied) on the end of the supplied power
cable.
4. Before operating, ensure that the voltage and frequency of the local power
source match the mains power requirements of the fixture.
5. Check the RUSH support pages on the Martin Professional website at
www.martin.com for the most recent user documentation and technical
information for the fixture. RUSH by Martin™ user manual revisions are
identified by the revision letter at the bottom of the inside cover.
Note that whenever AC mains power is applied to the fixture, it will reset all
effects and functions to their home positions. The fixture head will move. This
process usually takes around 20 seconds.
