RUSH MH 4 Beam User Manual
31
5. Lift the lamp out of its recess.
6. Disconnect the lamp and connect the correct type of lamp for the product
that you obtained in step 1.
7. Place the new lamp into the lamp recess.
8. See illustration on right. The lamp can
be adjusted using a flat-bladed
screwdriver. Center the lamp for the
best projection.
9. Reinstall the head covers, fastening
them securely, before reapplying
power.
10. If light output seems to be uneven, disconnect mains power, remove the
head covers and readjust the lamp, then reinstall the head covers and
reapply power to check. Repeat this process until you obtain the most
even light output.
11. Reset the Lamp On Time counter in the control menus.
