RUSH MH 4 Beam User Manual
29
Use gentle pressure only when cleaning, and work in a clean, well-lit area. Do
not use any product that contains solvents or abrasives, as these can cause
surface damage.
To clean the fixture:
1. Disconnect the fixture from power and allow it to cool for at least 60
minutes.
2. Vacuum or gently blow away dust and loose particles from the outside of
the fixture and the air vents at the back and sides of the head and in the
base with low-pressure compressed air.
3. Clean optical components by wiping gently with a soft, clean lint-free cloth
moistened with a weak detergent solution. Do not rub the surface hard: lift
particles off with a soft repeated press. Dry with a soft, clean, lint-free cloth
or low-pressure compressed air. Remove stuck particles with an
unscented tissue or cotton swab moistened with glass cleaner or distilled
water.
4. Check that the fixture is dry before reapplying power.
Lamp service
Read ‘Lamp safety’ on page 7 before servicing
the lamp.
Important!
The RUSH MH 4 Beam™ has been available in two models:
•
A
Philips Platinum 2R lamp model
produced until 2015
•
An
Osram HRI 132 W lamp model
produced from 2015.
Identify which lamp model fixture you have by checking the serial number
label on the base of the fixture (see illustration below).
Identification of lamp model on serial number label
