14
RUSH MH 4 Beam User Manual
Linking fixtures to power in a chain
If you obtain a 14 AWG / 1.5 mm
2
power input cable and 14 AWG / 1.5 mm
2
throughput cables from Martin™ (see ‘Accessories’ on page 47), you can
relay mains power from one fixture to another by connecting fixtures to power
in a linked daisy-chain, MAINS OUT throughput socket to MAINS IN input
socket.
Using 14 AWG or 1.5 mm
2
cables from Martin™, you can link:
•
Maximum five (5) RUSH MH 4 fixtures to power in a chain at 100-120 V, or
•
Maximum ten (10) RUSH MH 4 fixtures to power in a chain at 200-240 V.
Fixture overview
1 - LEDs
The fixture has four LEDs on the front of the base: two are reserved for future
use; the other two are marked as follows:
Power
Power on
DMX
Valid DMX signal present
2 – Display
3 – Buttons
MENU
•
Activate the menu mode functions, or
•
Return to the previous level of the menu
structure, or
•
Press and hold to exit the menus
DOWN
Go down a menu branch
UP
Go up a menu branch
