OPERATION AND MAINTENANCE MANUAL
1. Technical specifications
Emission
Front
Torch
Nominal power
1,5 W (SMD)
0,9 W (SMD)
Luminous flux
150 lm
70 lm
Operating time
2,5 h
3,5 h
Colour temperature
6500 K
Operating temperature
- 10°C ~ + 40°C
Protection class
III
Impact resistance
IK 07
Ingress protection
IP 20
Charging time
~ 2,2 h
Rechargeable battery
Li-poly 3.7 V ; 600 mAh
Lamp INPUT
5 V
1 A
Supplied cable
USB - USB type C
Weight
38 g
2. Proper use
For universal use, where a concentrated (torch) or wide (front)
light beam is required, particularly suitable for inspection po-
orly lit areas difficult to access.
3. Charging operation
When using for the first time, fully charge the lamp:
- Remove the protective cap and connect the supplied cable
to the USB-C socket then to the battery charger (5 V
1 A).
Check the charging process through the lamp indicator.
- RED LED on: low battery.
- GREEN LED on: battery charged.
- When charging is complete, disconnect the battery charger
and return the protective cap to its original position.
4. Use
Press the ON / OFF button:
- 1 click: concentrated lighting (torch).
- 2 clicks: wide lighting (front).
- 3 clicks: turn OFF.
The lamp clip is magnetic
and allows convenient adhe-
sion to a metal surface.
5. Safety notes
- Before using, make sure the right voltage is available.
- Use the supplied cable only for charging the lamp.
- Do not use the lamp or charger if damaged.
- Do not use the lamp in explosive environment in which
flammable liquids, gases or dusts are present. Risk to life!
- Not suitable for children, not a toy! Responsible use prevents
eyes problems or accidents.
- Do not look directly at the illuminating led, make sure that
nobody gets dazzled.
6. Maintenance
Do not disassemble or modify the lamp.
Failure to follow the instructions could result in electric shock
or injury.
Do not use solvents, corrosive cleaners or similar.
Use dry or slightly moist cloth for cleaning ONLY.
7. Regulations
Product complies with the European Safety Regulations.
8. Disposal
Dispose of electrical devices in an environmentally responsible
manner! Do not dispose of electrical devices with household
rubbish, please contact your local authorities for available di-
sposal options.
USER INFORMATION in accordance with “Directives 2011/65/
EU and 2012/19/EU.
The ‘Not in the bin’ symbol above when shown on
equipment or packaging means that the equip-
ment must, at the end of its life, be disposed of
separately from other waste. Unlawful disposal of
such equipment will be subject to application of
administrative sanctions provided by the current
legislation.
Made in China
Address / Indirizzo:
Cembre S.p.A.
via Serenissima, 9 25135 - Brescia (Italy)
imported in UK by CEMBRE Ltd, Curdworth, B76 9EB
www.cembre.com
Before using the device, carefully read the instructions
contained in this manual.
SAVE THESE INSTRUCTIONS: this manual contains
important safety and operating instructions.
Magnet can cause interference with electronic implant
such as cardiac pacemaker and thereby endanger life.
Do not keep the magnetic clip
in direct range of
the implant, for example a shirt pocket.
Do not turn on or point the lamp to people or animals,
the intense brightness may damage your eyesight.
DANGER of eye injury!
Magnet can erase data storage devices.
EN
CBL01
HIGH BRIGHTNESS RECHARGEABLE LED LAMP
LAMPADA LED RICARICABILE AD ALTA LUMINOSITA'
20M196I/E rev2
