www.victorruoshui.co.kr
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부 또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
than 20V exist between the instrument terminals.
Section Six
Store/recall the measurement results
The instrument can store xx measurement results.
How to save the data
When an earth resistance measurement is finished, p
ress the“
” key. Then the Main Screen displays”SAVE” in
the lower left part, the memory number in the auxiliary part add one automatically, and the measurement result is saved
successfully. The stored dada are parameters of all measurement.
Figure 13
Note
Please undertake “cancel data” operation for first use of storing function.
Data cannot be saved while the Low Battery Mark
is displayed on the Main Screen.
When the saved data reaches to the max limit of the capacity, Full” is displayed on the auxiliary part of the Main
Screen and no more data can be saved.
How to recall the saved data
The saved data can be read on the Main Screen according to following sequence.
Warning
To avoid electrical shock, remove the Test Leads off in MEN function.
