Hardware Installation and Reference Guide
Verifying Operating Status
33
4 Verifying Operating Status
4.1 Setting up Configuration Environment
Setting up Configuration Environment
Connect the PC to the management port of the switch through a network cable, as shown in Figure 4 -1.
Figure 4-1 Configuration Environment
Connecting the Console Cable
The RG-S5760C-X series switches adopt console cable connecting:
Plug the DB-9 head of the console cable into the network port of the PC.
Plug the RJ45 connector of the console cable into the console port of the switch.
Setting Terminal Parameters
Start the PC and run the terminal simulation program on the PC, such as Terminal on Windows 3.1 or
HyperTerminal on Windows 95/98/NT/2000/XP.
Set terminal parameters. The parameters are as follows: baud rate 9600, data bit 8, parity check none, stop bit 1, and
flow control as none.
1) Choose
Setup
>
Program
>
Attachment
>
Communication
>
Super Terminal
.
2) Choose
Cancel
. A window appears as shown in Figure 4-2.
Figure 4-2
