Ruijie RG-RSR20-14E Series Скачать руководство пользователя страница 17

Страница: 17 / 58



One-button system reset

When no SD card or USB flash disk is inserted into the device, or an SD card or a USB flash disk is inserted but no

software versions or configuration files for upgrade exist, press the FUNC multi-functional button to reset the system.

The system will restart based on the original software versions.



One-button upgrade of software versions and configuration files

When an SD card or a USB flash disk is inserted into the device, press the FUNC button. Then, the system searches

for the installation packages and configuration files that are applicable to the current device in the root directories of

the SD card and USB flash disk in sequence. After successfully finding the corresponding installation packages and

configuration files, the system checks the validity of the files and then upgrades the device by using the installation

packages and configuration files. After the upgrade, the system resets and restarts based on the new software

versions and configuration files.

When a storage medium is inserted, the system scans for an SD card first. If no SD card is inserted or the

inserted SD card does not contain applicable installation packages or configuration files, the system scans

for a USB flash drive. If neither the inserted SD card nor the USB flash drive contains applicable installation

packages or configuration files, the software versions and configuration files are not upgraded. Only the

system resets, and restarts based on the original software versions and configuration files.

One-button upgrade of the software version must strictly follow the “Configuring Reliability” chapter in the

related software configuration guide. After the system has scanned an SD card or USB flash drive, press the

FUNC button shortly.

About SIC Cards

This section describes the features of SIC modules supported by the RSR20-14E series router.

SIC-1HS Synchronous Interface Card

Product model: SIC-1HS

Image and Indicators

Figure 1-16: SIC-1HS high-speed synchronous serial interface card

The SIC-1HS is a Type B SIC, which can be inserted in a slot marked with “B”.

Each card has an interface status indicator (

LINK

indicator) and the card

Ready

indicator.

The following table describes LED indicators.

Содержание RG-RSR20-14E Series



























































Результаты поиска

Содержание RG-RSR20-14E Series

Отзывы:

Похожие инструкции для RG-RSR20-14E Series

Бренды по названию

Популярные бренды

Ruijie RG-RSR20-14E Series, Руководство по установке и справочное руководство по оборудованию

Результаты поиска

Содержание RG-RSR20-14E Series

Отзывы:

Похожие инструкции для RG-RSR20-14E Series

Бренды по названию

Популярные бренды