External Interface
The M12000-WS module provides external interfaces:
Console port: As a serial communication port, it uses the RS-232 interface level and standard RJ-45 connector. This
port is used to connect the module to the serial port of background terminal computers to perform tasks such as
firewall commissioning, configuration, maintenance, management, and software loading.
10/100M MGMT port: As the 10/100BASE-T Ethernet port, it uses RJ-45 connector. This port can be used to
connect the device to the Ethernet port of the background computer to load programs.
LED
LED
Identification on
the panel
Status
Definition
Off
The module is not powered on.
Solid red
The module fails.
Blinking green
The module is being initialized. If it keeps
blinking, the module may be faulty.
System LED
Status
Solid green
The initialization has finished and the switch
starts working.
Off
The port link is not up.
Solid green
The port link is up at 100Mbps.
Solid yellow
The port link is up at 10Mbps.
10/100M MGMT
Port LED
Link/ACT
Blinking
The port is sending and receiving data.
Specifications
Model M12000-WS
Port type
It provides one console port for management and one 10/100 MGMT port.
Transmission
medium
N/A
LED
Status, Link/ACT LED
Hot swapping
Supported
Power consumption <90W
EMC standards
GB9254-2008
Safety standards
GB4943-2011
Operating
temperature
0-50°C
Storage
temperature
-40-70°C
Operating humidity
10% to 90% RH (non-condensing)
Weight
Net weight: about 3.2KG
Dimensions
436 x 346 x 45 (L x W x H, mm)
M12010/M12006-FAN I
The M12010-FAN I is the fan module of the RG-S12010; the M12006-FAN I is the fan module of the RG-S12006. The
M12010-FAN I/M12006-FAN I provide a reliable heat dissipation system for the entire system to ensure the system's
stability. The M12010-FAN I/M12006-FAN I provide N+1 redundancy and support hot swapping.
Module Appearance
Figure 1-25 Appearance of the M12010-FAN I
