port
Button
1 RESET button
Power consumption
<131W
Hot swapping
Supported
Management
redundancy
Supported
EMC standards
GB9254-2008
Safety standards
GB4943-2011
Operating
temperature
0-50°C
Storage
temperature
-40-70°C
Operating humidity
10% to 90% RH (non-condensing)
Weight
Net weight: about 4.8KG
Dimensions
436 x 346 x 30 (L x W x H, mm)
The M12000-CM III adopts the CR2032 lithium battery. The device may explode if a wrong battery model is
used. Used batteries should be properly disposed of.
M12000-02XFP24SFP/12GT-EA
Module Appearance
Figure 1-11 Appearance of the M12000-02XFP24SFP/12GT-EA
External Interface
The M12000-02XFP24SFP/12GT-EA provides two 10000M XFP ports, 12 SFP ports and 12 fiber/copper combo ports.
The SFP ports support the rate of 100/1000M, the RJ45 ports support auto-negotiation at 10/100/1000 Mbps, and the XFP
and SFP optical modules support hot swapping.
LED
LED
Identification on
the panel
Status
Definition
Off
The module is not powered on.
Solid red
The module fails.
Blinking green
The module is being initialized. If it keeps
blinking, the module may be faulty.
System LED
Status
Solid green
The initialization has finished and the switch
starts working.
Off
The port link is not up.
Solid green
The device is connected to the 1000M port.
Solid yellow
The device is connected to the 10M or 100M
port.
RJ45 port LED
Link/ACT
Blinking
The port is sending and receiving data.
Off
The port link is not up.
SFP port LED
Link/ACT
Solid green
The device is connected to the 1000M port.
