Cutting machine SR 1 / SR 1 Turbo
10
3
Operating instructions
Please refer to the short instructions supplied with your machine for
the operation of your cutting machine.
Follow also the safety instructions in Chapter 1.1!
In its respective life cycle phases (transport,
commissioning, setup, operation, cleaning,
decommissioning, care / maintenance, dismantling /
disposal) this machine is designed for 1-person operation!
When using this machine, no other person may be present
near the machine. The exception (2-man operation):
Transport of machine and machine parts
Commissioning
Maintenance activities
The operator must make sure that no persons, who do not
know the hazards of the machine or cannot anticipate
them, are about in the area of the machine!
The operator controls may only be operated by touching it
with the fingers. Using any objects (e.g. blade) is
prohibited!
After each change of the cut-off knife or grate the cut-off
knife must be turned clockwise 2 times by means of the
handle nut to ensure that it does not collide with the
grate frame or the knife levels!
