Cutting machine SR 1 / SR 1 Turbo
13
Remove the cut-off knife as well as the grate frame with the
knife levels.
Remove the protective guard installed in the knife protection
box.
Remove the objects from the tool magazine (grate frame, knife
levels, stabilisers as well as the knife sharpener, if applicable).
5
Service: Care, maintenance, repair
Any work related in any way with service may be carried out only by
Rühle service technicians and by persons authorised by Rühle in
writing. In this regard, a distinction is made between regular care and
maintenance and repair. The respective qualification certificate must
be issued explicitly for the corresponding work.
Follow also the safety instructions in Chapter 1.1!
Notify and obtain permission from Rühle customer service
if welding or cutting work is required on the machine!
Wear cut protection gloves when working on the blades!
Reaching into the inside of the machine by opening the
floor covers is strictly prohibited when performing
activities of “Regular Care”!
Make sure when working on the electrical equipment of
the machine that
this is only done by qualified personnel!
the machine is always disconnected from power!
