Cutting machine SR 1 / SR 1 Turbo
6
1.2
Remaining risk of accidents
!!! All life cycles phases
Damaged knife elements must be replaced!
Cut protection gloves must be worn when working:
on the open knife protection box,
on the cut-off knife,
on the grate knives of the knife levels,
in the funnel, e.g. to remove product.
Reaching into the machine or the funnel during operation
is strictly prohibited!
Reaching below the knife protection box into the cutting
area is strictly prohibited!
Any manipulation and bypassing of the safety devices is
strictly prohibited!
With an unattended machine the knife protection box and
the hood to the tool magazine must be closed before
leaving the workplace!
When processing very watery products, spraying form the
funnel may occur in spite of installed slider! With such
product it is recommended to stand to the side of the
funnel when the machine starts.
!!! Maintenance
The machine must be disconnected from the mains when
performing maintenance work!
The protective covers (control cabinet, floor cover) may
be removed only while performing maintenance!
