Rugby MONARCH, Руководство по установке и эксплуатации

Страница: 6 / 21

Stock#: 1657447 (036226)
6
The type of fittings that are included will vary, depending on the model of the hoist being
installed. Refer to Figure 1a thru 1f, depending on the type of hoist and pump model that
is being installed.
For all of the units, a restricted fitting is supplied. This fitting reduces the speed at which
the hoist closes, to prevent damage to the truck or trailer frame. This fitting must be
installed in the base end of the hoist cylinder.
NOTE: All connections rely on O-ring or flare/face sealing methods. Therefore, no
thread sealant or tape of any kind is required to seal the joints.
The following charts are included to aid in the identification of hoses. Please note that
several different lengths of hoses are available for each type.
HOSE “A”
1/4” 6FJX-4FJX90
PART NUMBER LENGTH
STANDARD
SUPPLY
(Base end of cylinder)
1654546
(008238)
5’ LR-3510
1654547
(008239)
6’
1654548
(008240)
8’
1654576
(008332)
9’