Rugby MONARCH, Руководство по установке и эксплуатации

Страница: 3 / 21

Stock#: 1657447 (036226)
3
Warnings
WARNING: Installing or operating this hoist without first understanding the proper
installation and operation procedures can lead to serious injury or death. Always read and
understand fully all installation and operation manuals before installing or operating this
equipment.
WARNING: Welding, oxy-fuel cutting, or grinding sparks can cause fuel to ignite which
in turn can lead to injury or death. Always take adequate steps to avoid ignition of fuel
from fuel tanks when welding, grinding, or oxy-fuel cutting during equipment
installation.
WARNING:
Heat from the truck’s exhaust system can cause hydraulic component
failure and may lead to a fire which could cause injury or death. Always install
equipment in locations where heat from the exhaust system will not damage any
hydraulic component.
WARNING: Being under a raised body can result in serious injury or death should the
body inadvertently descend.
Never
position yourself or allow others to position
themselves under a loaded body. Always prop the unloaded body up using the body
prop or body props supplied. Remember body props are to be used only on an unloaded
body.
WARNING: Malfunctioning equipment can cause property damage, injury or death.
Always have faulty equipment repaired before continuing its use. If required, consult the
manufacturer.
WARNING: Overloading of a truck can cause truck component damage or an accident
which may cause injury or death.
Never
exceed the gross vehicle weight (GVW) or the
gross axle weight (GAW) rating of your vehicle or trailer.
WARNING: The inadvertent shorting of the truck’s electrical supply can cause a fire or
equipment damage that could lead to injury or death. Always disconnect the vehicle
battery prior to installing, servicing or repairing the pump.
WARNING: Connecting the hoist to a hydraulic system with more pressure (psi) or flow
(gpm) than is recommended by the hoist manufacturer can cause the hoist to fail during
the dumping of a load. This could lead to damage, serious injury, or death.
Be sure you
have the correct pressure and flow. Consult the manufacturer if you do not know the
recommended pressure and flow.
WARNING:
Adjusting the hydraulic pressure to more than the recommended setting
may cause the hoist to fail during the dumping of a load. This could cause damage,