Rugby MONARCH, Руководство по установке и эксплуатации

Страница: 8 / 21

Stock#: 1657447 (036226)
8
Installation
POWER UNIT ATTACHMENT:
The power unit should be mounted in a protected area near the hoist. For longevity of the
unit and related components, do not mount near exhaust system components or in the
path of road splash from the vehicle’s tires.
NOTE: Mount the unit horizontally so that the reservoir is level for full use of the
reservoir capacity.
WARNING: Check for potential clearance issues with vehicle brake lines, air lines, wire
harnesses, etc. before determining the power units location. Avoid damage to lines or
installing components that could rub against lines and cause system failures. Such
failures could lead to property damage, serious injury or death.
Securely attach the pump to the frame using two 3/8”-16 x 1” flange bolts in the front,
and one 3/8”-16 x 1” flange bolt at the back of the tank. Tighten to 33 ft/lbs torque.
HOSE CONNECTIONS:
Install all fittings and hoses. Tighten all of the connections, except the connection
between the base end port and the hose. Leave the connection between the base end port
and the hose loose at this time.