Working with Event Logs and Syslog Servers
Enabling Logging and Sending Event Logs to a Syslog Server
ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B
70
Working with Event Logs and Syslog Servers
Both the
Maintenance > Support Info
and
Administration > Log
pages can be used
to view the ZoneFlex P300’s current log file text. You can use the former to send
the log to Ruckus Wireless support or save it to a local file, and use the latter to
configure automatic delivery of log files to a syslog server.
Enabling Logging and Sending Event Logs to a Syslog
Server
If you have a syslog server on the network, you can configure the ZoneFlex P300
to send the device logs to the server. Enable logging (if disabled) and configure the
ZoneFlex P300 to send logs to the syslog server.
1
Go to
Administration
>
Log
. The
Administration > Log
page appears.
Figure 34. The Administration > Log page
2
In
Log Status,
click
Enabled
.
3
After enabling logging, configure the following options:
•
Syslog Server Address:
To enable the ZoneFlex P300 to send messages to
a syslog server as they appear, enter the IP address of the syslog server.
•
Syslog Server Port:
By default, the syslog port number is 514. If the syslog
server is using a different port, enter that port number in this field.
4
Click
Update Settings
to have the ZoneFlex P300 save and apply your changes.
