Ruckus Wireless ZoneFlex P300, Руководство пользователя

Страница: 17 / 85

Getting to Know the Hardware Features
Ethernet Connector, Aiming Button and Reset Button
ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B
17
Ethernet Connector, Aiming Button and Reset Button
The ZoneFlex P300 cable gland is used to attach and seal the data and PoE Ethernet
cable to the ZoneFlex P300 chassis. Plug the Ethernet cable into the RJ-45
connector under the cable gland (
Figure 5 ). Loosen and move the cable gland aside
to expose the Aiming ( Figure 6 ) and Reset ( Figure 7 ) buttons.
Figure 5. ZoneFlex P300 Ethernet connector
Pressing and holding the Aiming button ( Figure 6 ) for four or more seconds puts the
ZoneFlex P300 into aiming mode; the P300 remains in aiming mode for 15 minutes
after aiming is started. All the LEDs turn green and enter the aiming mode described
in
Table 4 . Table 4 lists the signal strengths associated with each of the LEDs.
Figure 6. ZoneFlex P300 Aiming button