Enabling Other Management Access Options
Pointing the Bridge to FlexMaster
ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B
69
Pointing the Bridge to FlexMaster
Your Ruckus Wireless device is required to “call home” to register with your
FlexMaster; FlexMaster does not initiate initial contact. To register successfully with
FlexMaster, your Ruckus Wireless device must know the FlexMaster server’s URL.
You need TCP ports 80 and 443 open between bridges and FlexMaster when
traversing Layer 3/firewall boundaries.
1
Go to
Administration > Management
.
2
Under
TR-069/SNMP Management Choice,
click
Auto
.
3
In
FlexMaster Server URL,
type the URL of the FlexMaster server.
4
Toggle the
Periodic FlexMaster Inform Interval
drop-down list to select how
frequently the device checks the FlexMaster server for any pending configuration
changes available for that Ruckus Wireless unit. On the FlexMaster side, this
field is referred to as the
Periodic Inform Interval.
5
Click
Update Settings
to save your changes.
After the bridge registers with FlexMaster, this
Administration > Management
page
shows the communication status between the bridge and FlexMaster.
Current Time
Shows the current date and time as known to the bridge. This
timestamp is accurate if an NTP server is configured on the
bridge. If there is no NTP server configured, this timestamp is
useful as a reference for comparison of the timestamps for
Last
attempted contact
and
Last successful contact.
Table 11. TR-069 status information (Continued)
Status Information
Description
