Ruckus Wireless ZoneFlex 7761-CM, Руководство по установке

Страница: 59 / 78

53
Switching LEDs to Cable Modem Mode
Using Power Over Cable (Actual Deployment)
Figure 32. Connection Status page - Page 2 of 2
9. In the Startup Procedure table ( Figure 31 ), look for Connectivity State .
10. Verify that the Status column for Connectivity State shows “OK”. This indicates that
the cable modem is connected to the network and operating normally.
11
Switching LEDs to Cable Modem Mode
The LEDs indicate the statuses of both the access point and cable modem components.
However, they can only show the status of one or the other at a time – either access point
status only (
AP Mode ) or cable modem status only ( CM Mode ).