Ruckus Wireless ZoneFlex 7761-CM, Руководство по установке

Страница: 40 / 78

34
Hardware Features
Weight and Dimensions
Weight and Dimensions
The CMAP has the following weight and dimensions:
■
Unit weight: 14 pounds (6kg)
■
Unit size : 33 x 42 x 21cm (plus the hangers, which add approximately 8cm more to the
height)
■
Shipping weight: 17 pounds (8kg)
■
Shipping size : 39 x 41 x 52cm
Connectors
The CMAP provides the following connectors:
■
PoE-Out connector: RJ-45 port that can supply power to devices that support PoE.
■
Three N-type antenna connectors: Connects to up to three 5GHz external antennas,
one horizontally polarized and one or two vertically polarized (not supplied with the
CMAP).
■
Customer-supplied DC power supply: Connected through a 4-pin connector, which is
normally used only for configuring or testing the CMAP.
“Step 2: Supply DC Power to
the CMAP” on page 10 includes a picture of a typical DC power supply.
“Step 2: Supply DC Power to the CMAP” on page 10 also shows the CMAP power
adapter assembly, which includes a reset button used to reboot the CMAP.
■
Coaxial cable Connector B (see Figure 22 ) must be connected to the CMTS backbone
and AC power when deployed in the field.
Ethernet/PoE-Out Port
The CMAP provides one 10/100Mbps RJ45 Ethernet port, which also functions as a PoE-
Out port. The PoE-Out port, which can supply up to 15.4 watts (compliant with 802.3af),
can be used to power PoE-capable devices (for example, an IP-based surveillance camera).
NOTE: The PoE-Out function is non-operational when the unit is powered via the 12 VDC
connector.
NOTE: By default, both Ethernet data and PoE-Out are enabled. If necessary, you can
disable PoE-Out from the Web interface. Refer to the AP User Guide for more information.