Ruckus Wireless ZoneFlex 7761-CM, Руководство по установке

Страница: 26 / 78

20
Preparing for Installation
Pointing the CMAP to ZoneDirector
NOTE: If there are multiple ZoneDirector devices on the network, type all the IP addresses
in the ASCII text area. Use commas (,) to separate the IP addresses. If a management
interface is used for Web UI management, the actual IP address must still be used when
configuring ZoneDirector as a client for a backend RADIUS server, FlexMaster server or in
any SNMP systems. If two ZoneDirector devices are deployed in a Smart Redundancy
configuration, both of the actual IP addresses must be used rather than the management
IP address.
6. Click Apply to save your changes.
7. Click OK to close the Scope Options dialog box.
You have completed customizing your DHCP server to automatically provide supported
APs with ZoneDirector’s IP address.
If Only ZoneDirector Exists on the Network (With ZoneDirector Subcode)
1. From Control Panel > Windows Administrative Tools, open DHCP , and then select the
DHCP server you want to configure.
2. If the Scope folder is collapsed, click the plus ( + ) sign to expand it.
3. Right-click Scope Options , and then click Configure Options . The General tab of the
Scope Options dialog box appears.
4. Under Available Options , look for the 43 Vendor Specific Info check box, and then
select it.
5. Under Data Entry , highlight the existing values, and then press <Delete> on your
keyboard.
6. Position your cursor again after the last octet (in this example, 0000) under the Binary
text area, and then type
03
(the subcode for ZoneDirector).