T504 Strand Mount Concurrent AP with Integrated CM Installation Guide, 800-70610-001 Rev A
38
4
Operating and Troubleshooting the
T504
This section lists some information that may be useful in operating and trouble-
shooting the T504. Topics discussed include:
•
Retrieving the CM’s MAC Address
•
Rebooting and Resetting the T504
•
How Radio Frequency Scanning Works
Retrieving the CM’s MAC Address
There are some configuration operations that require you to enter the CM’s MAC
address. The CM and AP MAC addresses are printed on labels on the outside of
the T504, as described in
Finding the AP and CM MAC Addresses
Retrieving the CM’s MAC Address
There are some configuration operations that require you to enter the CM’s MAC
address. The CM and AP MAC addresses are printed on labels on the outside of
the T504, as described in
Finding the AP and CM MAC Addresses
If you cannot find the CM’s MAC address on the T504, you can retrieve it via the
CMTS using the AP and CM command line interfaces:
•
Retrieving the CM’s MAC Address using the CM CLI
•
Retrieving the CM’s MAC Address using the AP CLI
Retrieving the CM’s MAC Address using the CM CLI
Use CM command line interface via the CMTS to retrieve the CM’s MAC address.
1
Obtain the IP address assigned to the CM. You can obtain this information from
the DHCP server at the CMTS.
2
Connect an administrative computer to the same subnet as the T504.
3
Start the Telnet or SSH client program on the administrative computer.
4
Log onto the CM using Telnet or SSH with the following logon details:
•
User name:
super
DRAFT
