Installing the T504
Unpacking the T504
T504 Strand Mount Concurrent AP with Integrated CM Installation Guide, 800-70610-001 Rev A
17
Unpacking the T504
1
Open the T504 package, and then carefully remove the contents.
2
Return all packing materials to the shipping box, and put the box away in a dry
location.
3
Verify that all items listed in
are included in the package.
Check each item for damage. If any item is damaged or missing, notify your
authorized Ruckus Wireless sales representative.
NOTE
Appendix A: Ruckus Wireless Factory- and Customer-Supplied Parts
includes illustrations and descriptions of these and other factory-orderable and
customer-supplied parts.
Package Contents
A Ruckus Wireless T504 package contains the items listed below:
•
Ruckus Wireless T504 unit with cable strand hangers, includes one 12mm
stainless steel M6x1 earth ground panhead screw with split lock and flat washers
•
One green/yellow earth ground wire with ring terminal
•
Service Level Agreement/Limited Warranty Statement
•
Regulatory Statement
•
Declaration of Conformity, if required
•
This
Installation Guide
Finding the AP and CM MAC Addresses
The T504 has separate MAC addresses for the internal AP and cable modem (CM),
mounted on the end of the T504 with the F-type connector and the ground screw
(see
).
.
DRAFT
